THEORY OF PARTICLE FILTRATION
The theory of particle filtration is well documented in literature and has been verified in practice down to lowest detectable particle sizes of available measuring equipment (Lee and Liu, 1980).
Capture of Particles
A filter's ability to capture particles depends on different physical and mechanical phenomena including diffusion, interception as well as inertial and sieving effects. Electrostatic interactions between fibres and the collected particles can also be of decisive importance, particularly in the case of synthetic polymer fibres which can carry high levels of electrostatic charge. In an ideal filtration process, each particle entering the filter is permanently arrested on initial contact with a fibre or a particle already captured. When small particles are filtered at low air velocities, the adhesive forces (van der Waal forces) greatly exceed the kinetic energy of the airborne particles and such particles, once captured, are unlikely to be dislodged from the filter. As particle size and air velocity increase, “bouncing off" of larger particles from fibres becomes a more likely occurrence.
Particles which are larger in diameter than the clearance between two fibres cannot pass.
Large particles have high momentum which makes it more difficult for them to follow the air stream around a fibre. The particles continue on their original path, contact the fiber and remain there. These inertial effects increase with increased air velocity as well as increased size or weight of the particle.
Small particles follow the air flow around the fibre and are captured if they come close enough to the fiber. The effect increases with increased particle size, smaller fibre diameters and/or smaller clearance between (i.e. closer spacing of) the fibres.
Diffusion in the lengthwise direction of media fibres can be found only in the case of very small particles such as viruses. The particles move randomly about within the air stream due to Brownian molecular motion. This mechanism is only important for particles with diameters < 1 micron.